3 available models

The ECO mechanical parts degreasing machine comes in a range of 3 models depending on the dimensions, weight, and quantity of parts to be cleaned:

IC2: Ø780 mm – H450 mm – max 150 kg
IC3: Ø900 mm – H550 mm – max 300 kg
IC4: Ø1100 mm – H700 mm – max 500 kg

Durability Proven for Any Industry

A long-standing product in our range, its robustness has been tested in numerous heavy vehicle garages and maintenance workshops.

• Payload up to 500 kg
• Wide-angle opening for hoist loading
• Removal of stubborn grease and oils using high-flow spraying

Automatic Cycle

All stages of the cleaning cycle are performed automatically according to preset timings.

The cycle can also include fully automated drying of the parts.

• Significant time savings
• Operations performed during downtime of the cleaning process
• Consistent, repeatable cleaning quality

Closed-Loop Operation

The cleaning fluid is used in a closed loop and filtered at multiple levels to collect contaminants and protect the washing pump.

• Reduced water consumption
• Reduced detergent usage
• Bath draining frequency based on contamination levels

Targeted Action with Manual Mode

In addition to automatic mode, the ECO can include a manual mode for performing targeted action on complex areas of the parts.

• Glove ports for access to the parts
• Fluid spray gun operated via foot pedal
• Switching between modes from the control panel
• Viewing window and lighting with vapor extraction

Rinsing Function

Before finishing or painting, an optimal and repeatable rinse after the washing stage is essential. For this type of application, the ECO can include an additional module that allows rinsing of the parts with clean water.

• Rinse ramps with calibrated nozzles
• Collection of rinse water in an intermediate tank
• Does not dilute the washing fluid
• Pumped evacuation of the rinse water

Adaptable and Versatile

There are numerous options that can be integrated depending on the application, whether essential for the process or to simplify maintenance.

• Disc or coalescence degreaser
• Blowing and/or hot air drying stages
• Vapor extraction or condenser
• Automatic filling with emptying function
• Fine filtration